Trucks

Scroll down this long page to see all of of our range of Trucks

Also check our 'Specials' button above for other trucks


1/80 (OO) Scale

EWS Fuel Truck - Mercedes Actros with a Realistic Roof Light Bar

 

 

 

Mercedes Actros Refuelling Truck - EWS Livery with a Realistic Roof Light Bar.

 

Finished in a EWS silver and red livery this is a must have for any EWS model railway depot.

 

This is a code 3 die cast metal model, modified and finished to a very high standard.

The donor chassis cab trucks alone now are hard to get hold of, but this is your chance to own one. (we have only a few with no others on the horizon, so if you want it, this is your only chance).

 

This model is unique and as you can see in the images it looks superb and very realistic on a modern OO/HO Railway as a trackside feature.

 

This type of vehicle is used by EWS for supply and refuelling operations away from the fuel depots, perhaps in sidings or similar areas. The tanker could also be used to deliver fuel to fuel point depots.

 

This model was built as a prototype and has many hours invested into it as the decals are made to the realistic size and colour.

 

 

Modifications

  • The vehicle has been stripped right down, and prepared for a 'code 3' conversion

  • The tank bowser has been re-sprayed in silver.

  • Realistic amber roof light bar fitted to the cab roof.

  • Modern UK standard chevron boards fitted below the rear light clusters.

  • EWS decals fitted to the tank on either side and rear of the tanker with further fuel identification board decal fitted to the rear.

  • EWS logo fitted to both of the cab doors and on the panel above the front grill.

  • The model is finished with side mirrors, realistic lights front and rear, highly detailed road wheels and rubber like tyres.

This is a unique refuelling truck that will look superb on any modern day model railway layout and the base models are becoming very hard to find.

 

Only the Mercedes Actros - EWS Tanker model shown is included, all other scenery, people, track, locomotives, vehicles etc shown in the pictures are NOT included.

 

Supplied in the original card display box

 

This is not a toy.

For a recommended age of 16 or over

 

Please note:

Being a die cast metal model, it is not recommended to be placed onto a track that is or could be electrified as this may short circuit and cause damage to your equipment.

 

Due to the modifications made to this model, the number of small parts, and general delicate construction of the code 3 parts, this model is Not recommended as a toy for children. It is purely for use as a scenic feature for a model railway under adult supervision.


1/87 (HO) Scale

Iveco Network Rail Articulated Truck and 40' Trailer with a Poseable Hiab / PalFinger crane

 click here for larger resolution image  click here for larger resolution image  Click here for higher resolution image

Click here for larger resolution image    click for a higher resolution image  Click here for larger resolution image  Click here for larger resolution image

 

Iveco Network Rail Articulated Truck and 40' Trailer with a Poseable PalFinger crane- 1/87 (HO scale)

 

 

This is a code 3 die cast metal and plastic model with both the Tractor unit and Trailer finished in Network Rail livery.

 

The model includes: a detailed interior, side mirrors, highly detailed wheels and realistic rear trailer lights, sun visor, number plates etc.

 

An exceptional model that will add extra realism to any modern day model railway layout.

This sort of truck would be used to transport rails, sleepers, signaling equipment, emergency repair equipment, infact anything in the day to day running of the rail network.

 

The posable Hiab / Palfinger style crane folds away at the end of the trailer bed, but when needed un-folds and extends exactly like the real thing does! Un-believable considering it is 1/87click for a higher definition image scale!

You can pose the crane in any position, perhaps lifting loads on or off the back of the trailer bed, at full stretch either side or indeed 360 degrees fully around the vehicle.

 

The Iveco tractor unit detaches from the trailer if required making this model very versatile for different layout scenarios.

 

This model looks superb and very realistic on any modern OO/HO Railway as an eye catching trackside feature in your depot or railway sidings perhaps even on the open road.

Add considerable realism to your modern railway layout with this superb model.

 

Modifications

  • Fully posable working Hiab / Palfinger crane fitted to the rear of the trailer with detachable stabiliser legs.

  • Realistic tread plate sprayed alluminium/steel fitted to the bed of the trailer with a white bulkhead and border trim surround.

  • Highly realistic amber roof bar light fitted above the cab

  • Network Rail quality decals fitted to the cab on either side of the vehicle with further Network Rail decals fitted to front below the windscreen and up high on the cab roof

  • Network Rail decal added to rear of the trailer with UK number plate GB06 VNN.

  • UK number plates GB06 VNN fitted to the Iveco unit front and rear

  • Red and yellow chevron signage on trailer rear.

Please note, the red PalFinger crane shown in these images is temporary un-available, it has been substituted with a white version (as per the Unimog version at the bottom of this page)

 

Only the Iveco - Network Rail Truck and Hiab Trailer model shown is included, all other scenery, people, track, locomotives, vehicles etc shown in the pictures are NOT included.

 

The load of broken metal rail tracks on the bed are not included within the sale.

 

Please note:

Being a die cast metal model, it is not recommended to be placed onto a track that is or could be electrified as this may short circuit and cause damage to your equipment.

 

Due to the modifications made to this model, the number of small parts and added transfers, and general delicate construction of the code 3 parts, this model is Not recommended as a toy for children. It is purely for use as a scenic feature for a model railway under adult supervision.

 


1/87 (HO) Scale

Volvo Truck - EWS with 40' Trailer

click here for a larger resolution image

click here for higher resolution image  

  click here for higher resolution image

 

Volvo EWS Articulated Truck with 40' Trailer - 1/87 (HO scale)

 

This is a code 3 1/87 OO scale die cast metal and plastic model with both the Tractor Cab and 40' Trailer unit finished with EWS livery logos.

The model includes: a detailed interior, side mirrors, highly detailed wheels and realistic rear trailer lights etc.

 

This articulated truck would be used by EWS for logistic operations and therefore a common sight at freight loading depots.

Perhaps it would also be used to supply locomotive parts to a maintenance depot?

 

Whatever you decide to use it for, this model looks superb and very realistic on any modern OO/HO Railway as a trackside feature.

 

 

Vehicle Modifications

  • EWS quality decals fitted to the cab doors on either side of the vehicle and roof wind deflector with a further EWS decal fitted to front of the cab below windscreen.

  • The 40' Trailer has been re-sprayed to replicate the EWS executive livery

  • www.ews-railway.co.uk website address either side of trailer.

  • EWS logo decals added to both sides and rear of the trailer, web address on either side.

  • UK number plates (GB06 VNN) fitted to the front of both the Volvo cab and rear trailer

  • Yellow and red chevron rear signage.

Only the Volvo - EWS  Truck model shown is included, all other scenery, people, track, locomotives, vehicles etc shown in the pictures are NOT included.

 

Supplied in the original plastic display box but will be well packaged before despatch.

 

Modified for model railway trackside use and therefore for a recommended age of 12 or over

 

Please note:

Being a die cast metal model, it is not recommended to be placed onto a track that is or could be electrified as this may short circuit and cause damage to your equipment.

 

Due to the modifications made to this model, the number of small parts and added transfers, and general delicate construction of the code 3 parts, this model is Not recommended as a toy for children. It is purely for use as a scenic feature for a model railway under adult supervision. 


1/87 (HO) Scale

Iveco Truck - Network Rail with 40' Trailer

Click for higher resolution image

 click here for larger resolution image  click here for larger resolution image  Click here for higher resolution image

    click for a higher resolution image  Click here for larger resolution image 

 

Iveco Network Rail Articulated Truck and 40' Trailer- 1/87 (HO) scale

 

This is a code 3 die cast metal and plastic model with both the Tractor unit and Trailer finished in Network Rail livery

 

The model includes: a detailed interior, side mirrors, highly detailed wheels and realistic rear trailer lights, sun visor, number plates etc.

 

The Iveco tractor unit detaches from the trailer if required making this model very versatile for different layout scenarios.

 

This model looks superb and very realistic on any modern OO/HO Railway as a trackside feature or on the open road.

 

Modifications

  • Network Rail quality decals fitted to the cab doors on either side of the vehicle with further Network Rail decals fitted to front below the windscreen and up high on the cab roof.


  • Network Rail decals added to both sides and rear of the trailer.

  • www.networkrail.co.uk website address either side of trailer

  • UK number plates (GB06 VNN) fitted to the Iveco front, and trailer rear doors

  • Red and yellow chevron signage on trailer rear.

Only the Iveco - Network Rail Truck and Trailer model shown is included, all other scenery, people, track, locomotives, vehicles etc shown in the pictures are NOT included.

 

Supplied in the original plastic display box but will be well packaged before despatch.

 

Modified for model railway trackside use and therefore for a recommended age of 12 or over

 

Please note:

Being a die cast metal model, it is not recommended to be placed onto a track that is or could be electrified as this may short circuit and cause damage to your equipment.

 

Due to the modifications made to this model, the number of small parts and added transfers, and general delicate construction of the code 3 parts, this model is Not recommended as a toy for children. It is purely for use as a scenic feature for a model railway under adult supervision.


1/87 (HO) Scale

EWS Refuelling Truck - Mercedes Atego with a rear operating platform

click here for larger resolution image

 click here for larger resolution image  click here for larger resolution image  Use this vehicle to reach anywhere from bridge/tunnel roofs to the top of locomotives

Click here for larger resolution image     

 

Mercedes Atego Refuelling Truck - EWS Livery with a rear operating platform and hose reel.

 

Finished in the authentic EWS Maroon with a rear operating platform and fuel hose reel (no extending hose)

 

This is a code 3 die cast metal model, modified and finished to a very high standard.

The donor chassis cab trucks alone now are hard to get hold of, but this is your chance to own one. (this is a unique prototype and no others made with no others on the horizon, so if you want it before Christmas, this is your one and only chance).

 

This model is totally unique and looks superb and very realistic on any modern OO/HO Railway as a trackside feature.

 

This type of vehicle would be used by rail operator companies for refuelling operations away from the fuel depots, perhaps in sidings or similar areas. The tanker could also be used to deliver fuel to fuel point depots.

This model was built as a prototype and has many hours invested into it. The initial design (like the real tankers) is based upon an airport operation re-fuelling tanker, allowing the operator access to the rear pumping kit and a large reel to house the extended fuel hose.

 

Modifications

  • The vehicle has been stripped down and the cab and tank re-sprayed in 'Rail Match' EWS Maroon.

  • A detailed operation platform and fuel hose reel added to the rear of the vehicle with the rear light cluster mounted onto that.

  • Modern UK standard chevron boards fitted below the rear light clusters.

  • EWS decals fitted to the tank on either side of the vehicle with further fuel identification board decals fitted to the sides and rear.



  • Authentic UK number plate (GB06 VNN) fitted to front and rear of the vehicle

  • The model is finished with side mirrors, realistic lights front and rear, highly detailed road wheels and rubber like tyres.

This is a unique refuelling truck that will look superb on any modern day model railway layout.

We only have this one prototype model and when it is gone, it is gone!

 

Based upon the statement above, If you would prefer to make a highly sensible offer for this vehicle prior to us putting it up for auction, or wish to use the eBay 'Buy Now' service, please use the contact button at the top of this page.

 

Only the Mercedes Atego - EWS Tanker model shown is included, all other scenery, people, track, locomotives, vehicles etc shown in the pictures are NOT included.

 

Supplied in the original card display box

 

This is not a toy.

For a recommended age of 16 or over

 

Please note:

Being a die cast metal model, it is not recommended to be placed onto a track that is or could be electrified as this may short circuit and cause damage to your equipment.

 

Due to the modifications made to this model, the number of small parts, and general delicate construction of the code 3 parts, this model is Not recommended as a toy for children. It is purely for use as a scenic feature for a model railway under adult supervision.


 

1/87 (HO) Scale

1/87 (HO) Scale - SRS - Network Rail - 'Road-Rail' Access Platform Truck with Road-Rail features.

 
click here for larger resolution image click here for larger resolution image Use this vehicle to reach anywhere from bridge/tunnel roofs to the top of locomotives click here for larger resolution image
Click here for larger resolution image Able to rotate the platform (360 degrees) offside view Click here for larger resolution image
Click here for larger resolution image  

This model has been sold direct from this website, we do not sell this type of model on eBay, so it is always worth checking these pages to see what we have available.  We have left these images and description on this page upon request for our visitors to view.

Mercedes Atego - SVABO Access Platform - Road Rail Vehicle - 1/87 (HO scale)

 

Finished in SRS - Network Rail livery with an operating Access Platform and actual Road-Railbased upon this real SRS - Network Rail access platform truck features based upon a real SRS Network Rail Maintenance vehicle as shown in the image to the right.

 

This model is totally unique and looks superb and very realistic on any modern OO/HO Railway as a trackside feature.

 

With this vehicle you can now cut those over hanging trees back, Inspect and repair your bridges and tunnels, service or inspect locomotives or rolling stock and the obvious install, service and maintain pantagraphs etc.

 

 

Modifications

It would be impossible to list all of the modifications and conversions for this model, however from the photographs above you will be able to see that the original donor truck has been modified to the highest level to achieve this unique model.

  • The original donor model truck has been fully stripped down, re-sprayed in the accurate 'RailMatch' warning yellow.



  • 'Road-Rail' equipment; The rail wheels/bogies can actually be lowered onto standard track and the model can be positioned in a 'road-rail' situation with the road wheels lifted from the track. (please note that the rail wheels are non-revolving and therefore this is a not rolling stock model and therefore should not be pushed along the track as it is not a toy).



  • A fully operating and extending Pailfinger style access platform fitted with the ability to rotate the platform to 360 degrees, so either side or in front of the vehicle

  • . This hydraulic crane system has the PalFinger logo fitted either side.

  • All chassis and cab modifications made to accommodate the 'Road-Rail' features including extended head light and tail light cluster and bumper/guard assemblies and finally painted in the correct RailMatch warning yellow

  • .

  • Hazard Beacon lights (clear orange) fitted on metal poles either side in their real position behind the cab mounted to the main body

  • .

  • Body modified to accommodate the Road-Rail equipment and the addition of 'tread' plate (finished in aluminium) fitted to the bed of the main body.

  • SRS and Network Rail quality decals fitted to the cab and doors on either side of the vehicle with further SRS decals fitted to the platform basket chassis.



  • Authentic UK number plate will be fitted to front and rear


  • Converted to right hand drive (for UK roads)

  • The model is finished with side mirrors, realistic lights, highly detailed road wheels and rubber like tyres.

This is a totally unique vehicle that has many man hours in both its design and construction.

It will look highly realistic on any modern day model railway layout.

 

We only have one of these finished vehicles at present, we may possible get another if we can get the parts but it will possible be a different livery/colour perhaps.

They take many man hours to build so do not count on another one, when it is gone, it is gone!

 

Based upon the statement above, If you would prefer to make a highly sensible offer for this vehicle prior to us putting it up for eBay auction, please use the contact button at the top of this page and we will get back to you.

This model has been sold direct from this website, we will leave these images and description on this page for our visitors to view.

 

Only the Mercedes Atego SRS - Network Rail model shown is included, all other scenery, people, track, locomotives, vehicles etc shown in the pictures are NOT included.

 

Supplied in the original card display box

 

This is not a toy.

For a recommended age of 16 or over

 

Please note:

Being a die cast metal model, it is not recommended to be placed onto a track that is or could be electrified as this may short circuit and cause damage to your equipment.

 

Due to the modifications made to this model, the number of small parts, and general delicate construction of the code 3 parts, this model is Not recommended as a toy for children. It is purely for use as a scenic feature for a model railway under adult supervision.


 

1/87 (HO) Scale

 

 

Freightliner - DAF 95XF Articulated Truck and 40' Trailer

 click here for larger resolution image  click here for larger resolution image  Click here for higher resolution image

Click here for larger resolution image    click for a higher resolution image  Click here for larger resolution image 

 

SOLD - Freightliner - DAF 95XF Articulated Truck and 40' Trailer - 1/87 (HO scale)

 

This is a code 3 die cast metal and plastic model with both the Tractor unit and Trailer finished in  Freightliner livery.

 

The model includes:  detailed wheels and realistic rear trailer lights, UK style number plates etc.

 

An unusual model that will add extra realism to any modern day model railway layout.

This sort of DAF truck would be used by Freightliner to transport freight to and from their cargo terminals.

 

The DAF tractor unit detaches from the trailer if required making this model very versatile for different layout scenarios.

 

This model looks superb and very realistic on any modern OO/HO Railway as an eye catching trackside feature in your depot or railway sidings perhaps even on the open road.

Add considerable realism to your modern railway layout with this superb model.

 

Modifications

  • Realistic tread plate sprayed aluminium/steel fitted to the bed of the trailer with a yellow bulkhead and border trim surround.

  • Highly realistic amber roof bar light fitted above the cab

  • Freightliner quality decals fitted to the cab on either side of the vehicle with further Freightliner decals fitted to front below the windscreen and up high on the cab roof and rear panel

  • Freightliner decals added either side of the trailer bulkhead and to rear of the trailer.

  • UK number plates GP06 YTP fitted to the DAF unit front and rear and rear of the trailer.

  • Red and yellow chevron signage on trailer rear.

Damage

It is fair to point out that the DAF Tractor unit had sustained damage to its rear lights which have been repaired by 'scratch built' replacements as seen in the images.

 

Modifications to the trailer to make it a flatbed have exposed the silver 'lump' in the bed at the front end, this is the pivot point cover and can be camouflaged with a haulage load being placed onto the trailer.

 

If you have got this far and looked at the photos already and have not noticed, then you probably will not be concerned with these imperfections, but it is our policy to always advise if we know of any damage to our models.

 

What you get...

Only the DAF 95XF - Freightliner Truck and Trailer model shown is included, all other scenery, people, track, locomotives, vehicles etc shown in the pictures are NOT included.

 

Supplied in the original plastic display box but will be well packaged before despatch.

 

Modified for model railway trackside use and therefore for a recommended age of 12 or over

 

Please note:

Being a die cast metal model, it is not recommended to be placed onto a track that is or could be electrified as this may short circuit and cause damage to your equipment.


 

 

1/87 (HO) Scale

Network Rail Mercedes Unimog with a Poseable PalFinger crane and Road-Rail features

 click here for larger resolution image  click here for larger resolution image   Click here for higher resolution image 

Click here for larger resolution image    click for a higher resolution image  Click here for larger resolution image  Click here for larger resolution image

 

Network Rail Mercedes Unimog with a Pose-able PalFinger crane and Road-Rail features- 1/87 (HO scale)

This is a code 3 die cast metal and plastic model finished in Network Rail livery.

 

The model includes: Pose-able Palfinger Crane, Road-Rail features (dummys, they don't actually drop down on this model) a detailed interior, side mirrors, highly detailed wheels and realistic head and tail lights, realistic amber roof beacon lights, UK style number plates etc.

 

An exceptional model that will add extra realism to any modern day model railway layout.

This sort of vehicle is used by Network Rail and their contractors to maintain the rail network across the UK, transporting and replacing sleepers, track sections, ballast drop bags, signalling equipment, emergency repair equipment, in-fact anything in the day to day running of the rail network.

 

To demonstrate their use on the UK rail networks, an example of an older type Unimog but this time in Balfour Beatty livery can be seen to the right which has a similar crane and payload configuration to the Network Rail model.

 

The pose-able Palfinger style crane folds away at the end of the vehicle chassis, but when needed un-folds and extends exactly like the real thing does! Un-believable considering it is 1/87 scale!

 

You can pose the crane in any position, perhaps lifting loads on or off the back of the Unimog, at full stretch either side or indeed 360 degrees fully around the vehicle.

 

This Mercedes Unimog model is very versatile for many different layout scenarios and it looks superb and highly realistic on any modern OO/HO railway as an eye catching trackside feature anywhere on your layout

Add considerable realism to your modern railway layout with this superb model.

 

Modifications

  • Fully pose-able working Palfinger crane fitted to the rear of the vehicle chassis with extending outwards and down stabiliser legs.

  • Vehicle body sectioned shortened to accept the Palfinger crane.

  • Palfinger logo added to the crane boom arm.

  • Cab removed re-sprayed in Network Rail white and re-assembled.

  • Warning Yellow painted to the bonet and rear body and cross member section.

  • Road-Rail features in Warning Yellow fitted front and rear (please be aware that these are 'dummy' axle wheels that are glued in position and do not drop down to the tracks)

  • Network Rail quality decals fitted to the cab on either side of the doors with further Network Rail decals fitted to front below the windscreen and rear of the crane.

  • Converted to Right Hand Drive for UK road use.

  • UK number plates GB06 VGN fitted to the Unimog front and rear

 

Only the Mercedes Unimog - Network Rail with Palfinger crane model shown is included, all other scenery, people, track, locomotives, vehicles etc shown in the pictures are NOT included.

 

Supplied mounted in the original plastic display box but will be well packaged before despatch.

 

Modified for model railway trackside use and therefore for a recommended age of 16 or over

 

Please note:

Being a die cast metal model, it is not recommended to be placed onto a track that is or could be electrified as this may short circuit and cause damage to your equipment.

 

Due to the modifications made to this model, the number of small parts and added transfers, and general delicate construction of the code 3 parts, this model is Not recommended as a toy for children. It is purely for use as a scenic feature for a model railway under adult supervision.


 

1/87 (HO) Scale
 

Network Rail - International 4400 Truck with an operating tipper body

click here for larger resolution image

 click here for larger resolution image  click here for larger resolution image  Use this vehicle to reach anywhere from bridge/tunnel roofs to the top of locomotives

Click here for larger resolution image  Able to rotate the platform (360 degrees)   

Network Rail - International 4400 Truck with an operating tipper body - 1/87 (HO) Scale

Finished in Network Rail livery with an operating tipper body mechanism.

 

This is a code 3 die cast metal model, modified and finished to a very high standard.

 

This model is a prototype and therefore totally unique and looks superb and very realistic on any modern OO/HO Railway as a trackside feature.

 

This type of vehicle would be used by Network Rail or rail maintenance companies for many different operations that involved large or heavy loads being transported to the trackside, service depot or in a yard.

Loads could include; ballast/aggregate, concrete sections, pipes, signalling equipment, etc.

 

Modifications

  • Network Rail quality decals fitted to the cab doors on either side of the vehicle.

  • Network Rail decals fitted to front bonet of the cab and rear of the tipper body.

  • The model is finished with side mirrors, realistic lights front and rear, highly detailed road wheels and rubber like tyres.

This is a unique truck that will look the part on any modern day model railway layout.

We only have one of these with a tipper body, when its gone, its gone!

 

Only the Network Rail - International 4400 Tipper Truck model shown is included, all other scenery, people, track, locomotives, vehicles, trackside equipment etc, shown in the pictures are NOT included.

 

Supplied in the original card display box

 

This is not a toy.

For a recommended age of 16 or over

 

Please note:

Being a die cast metal model, it is not recommended to be placed onto a track that is or could be electrified as this may short circuit and cause damage to your equipment.

 

Due to the modifications made to this model, the number of small parts, and general delicate construction of the code 3 parts, this model is Not recommended as a toy for children. It is purely for use as a scenic feature for a model railway under adult supervision. 


 

1/87 (HO) Scale

Freightliner - Mercedes Atego Truck

 click here for larger resolution image  click here for larger resolution image  Click here for higher resolution image

Click here for larger resolution image    click for a higher resolution image  Click here for larger resolution image 

 

SOLD OUT - Freightliner - Mercedes Atego Truck - 1/87 (HO scale)

 

This is a code 3 die cast metal and plastic model finished in Freightliner livery.

 

The model includes:  detailed wheels and realistic rear trailer lights, mirrors (not shown, still in packet).